Setting Materials

We are the largest suppliers of setting materials such as Jamo/Custom Building Products,

Quikrete, Miracle Sealants, Catalina Chemicals, Rubi Tools and Husqvarna Construction/Target

and Pliteq Geniemat sound control in South Florida, Broward, Palm Beach and Monroe County.


Have questions? we have answers. Click Here

for Information about trims and joints please click the above Picture
SPIDERWEB™ II UNCOUPLING MAT



A waterproof, vapor-proof uncoupling membrane that can be used for crack-suppression in most tile, porcelain or natural stone installations, and can be applied over challenging substrates such as installation over green (young) concrete and single ply 19.2" (49 cm) oc wood framed floors. SpiderWeb™ II is designed differently than bonded membranes, with a sacrificial layer of fleece reinforced fabric that shears away, or uncouples, when exposed to excessive substrate movement, absorbing stress and preserving the surface and integrity of the tile. SpiderWeb II’s bonding layers have reinforced fleece which locks mortar into the mat, ensuring strong, reliable installations





CRACK BUSTER™ PRO CRACK PREVENTION MAT UNDERLAYMENT


A self-bonding, fabric-reinforced asphaltic mat that reduces crack transmission in tile and stone floors. For both full and partial floor applications, Crack Buster® Pro is an anti-fracture membrane for horizontal cracks up to 3/8" (9.5 mm). Its strong self-adhesive backing and uniquely designed surface provide secure bonding for all types of ceramic tile, natural stone and terrazzo.






FRACTUREFREE™ CRACK PREVENTION MEMBRANE

Ready-to-use, elastomeric, crack prevention membrane developed for protecting tile floors from cracks due to minor surface movement. Provides anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other nonstructural cracks. Suitable for all interior or exterior commercial and residential tile and stone installations. Easily applied with a roller or trowel. Meets A118.12 for crack isolation membranes.




Peel & Stick Primer





Peel & Stick Primer is used for the application of peel and stick mat underlayments like Crack Buster® Pro and EasyMat®. It seals porous surfaces and improves the bond of underlayments.




LevelQuik® RS Rapid Setting Self-Leveling Underlayment

Helps level floors prior to the installation of ceramic tile, natural stone, resilient flooring, carpet, wood and other floor coverings. This quick-setting underlayment can be applied to 1" (2.5 cm) thick in one pour and seeks its own level in minutes. With proper installation, the use of LevelQuik® RS can achieve an extra heavy rating for high impact use in food plants, dairies, breweries and kitchens.




LevelQuik® Latex Primer





Latex primer/sealer that prepares surfaces for the application of LevelQuik® or LevelLite® Self-Leveling Underlayments. It seals porous surfaces and improves the bond of underlayments.



MEGAFLEX® CRACK PREVENTION MORTAR

The ultimate in flexibility and bond strength for the most demanding installation requirements. Its unique blend of polymers and inorganic chemicals enhance the bond between the tile and substrate for unsurpassed performance as part of a wide variety of new and existing job conditions. Flexible enough to withstand horizontal substrate movement to 1/8" (3 mm). MegaFlex® offers up to 20% more coverage than other thin-sets and exceeds ANSI A118.4E, A118.15E and A118.11 standards without the need for additives. Use it for interior or exterior floors, countertops and walls.



PROLITE™ TILE & STONE MORTAR

Offers high flexibility and bond strength in a lightweight formula with excellent handling characteristics for a wide variety of floor and wall tile installations. Excellent for setting large format tile or stone, ProLite® will not sag or slip on walls and offers non-slump performance for floor installations. Capable of thin-set or medium bed application up to 3/4" (19 mm) thick on horizontal surfaces after beat-in. Formulated with CustomLite® Technology, ProLite® is 40% lighter than traditional mortars. For interior and exterior installations. A 30 lb. (13.6 kg) bag covers the same area as a 50 lb. (22.68 kg) bag of traditional mortar. Formulated with recycled material contributes to LEED® certification. Exceeds ANSI A118.4TE, A118.15TE and A118.11 without the need for additives.



MULTI-BOND POLYMER-MODIFIED THIN-SET MORTAR

Multi-Bond is a good bond strength, all-purpose bonding mortar for floor and wall tile projects. Fast setting, even in cool weather climates. Polymer-modified to ensure enhanced flexibility; smooth, easy troweling with consistent, long-lasting results. Meets ANSI A118.4 and A118.11 without the need for additives. 



MARBLE MASTER™



Marble Master is a medium bed, dry set mortar designed for installing marble, granite and tiles 12" x 12" (30 x 30 cm) or larger. Non-slumping, eliminates lippage, non-sag/non-slip on vertical installations. Meets ANSI A118.4 and ANSI A108.11.



PREMIUM SANDED THIN-SET MORTAR



Premium is a quality sanded thin-set with extra long open time which is smooth and easier to apply. Specially formulated for warm weather applications. Meets ANSI A118.4 and ANSI A108.5 with Star Set® 1000 Latex Additive added.



JAMOBLEND™ FLOOR & WALL SANDED THIN-SET MORTAR

JAMOBlend is an economical, sanded thin-set for most tile installations, with good working time to apply and adjust tiles. Meets ANSI A118.1. Meets ANSI A118.4 with StarSet® 1000 Latex Additive added.



UNSANDED THIN-SET MORTAR


Unsanded Thin-Set is the dry set mortar of choice for sheet mounted mosaics and 4-1/4" x 4-1/4" (11 x 11 cm) wall tile. Meets ANSI A118.1 an ANSI A108.5.



STAR BOND LATEX ADDITIVE

Star Bond is a ready-to-use bonding agent for concrete, stone, brick or similar substrates.



STAR SET® 1000 LATEX ADDITIVE

Star Set 1000 is an additive that increases the performance and bond strength of JAMO Premium Sanded and GTS® Thin-Set Mortars. Meets ANSI A118.4 and ANSI A108.5.



MASTIK 440 TYPE 1 CERAMIC TILE MASTIC


Mastik 440 is a contractor grade acrylic mastic for use on floor and wall installations. Exceeds ANSI A136.1.








COMMERCIAL 100% SILICONE CAULK

Our Commercial 100% Silicone Caulk is permanently flexible and is designed for use in coves, corners, changes in plane and expansion joints associated with exterior or interiors applications of tile and stone. Can be used in pools and other wet applications. Conforms to ASTM C-920, Type S, Grade NS, Class 25, Use T, I, M and G, ASTM C1248 and ASTM C-794 properites. Conforms to TCNA Handbook EJ 171.



MASTER COLOR™ GROUT

Master Color Grout is a polymer-modified, sanded grout for joint widths from 1/8" to 5/8" (3 to 15 cm). Provides exceptional color uniformity, high wear characteristics and stain resistance without the addition of latex admixtures. Excellent flexural and bond strength, color control, high compressive strength and minimal efflorescence. Resists bacteria, fungus, alkalis and is freeze/thaw stable when cured. Available in 37 colors. Exceeds ANSI A118.6. Available in 25lb and 10lb dry grout colors.

Grout sample colors in the brochure are as close as possible to actual color of the grout. Final grout color may vary due to differing installation techniques.



CEG-LITE™ 100% SOLIDS COMMERCIAL EPOXY GROUT

Two-component epoxy system that combines a pigmented hardener with the container of resins and lightweight recycled aggregates to fill joint widths from 1/16" to 1/2" (1.5-13 mm). Its lightweight properties make it spread like a cement based grout and allow it to cling in vertical joints without an additive like no other epoxy grout can while still allowing for easy water based clean-up.



STAR CLEAN®


Star Clean
® is a sulfamic acid based product with additives developed to safely clean cement grout residue from ceramic or quarry tile. Star Clean is also an excellent cleaner to remove efflorescence from masonry surfaces. When mixed with cold, potable water, it produces a nonvolatile, odorless, acidic solution that should not harm tile, grout joints or pigmented masonry surfaces.


PENETRATING SEALER



An economical, no-sheen, natural look, water-based, penetrating sealer designed to resist stains. May also be used as a pre-grouting sealer. Allows moisture vapor transmission. Can be used as a grout sealer.



HEAVY-DUTY TILE & GROUT CLEANER



A concentrated, high-alkaline cleaner and degreaser. Aqua Mix® Heavy-Duty Tile & Grout Cleaner effectively removes grease, soap scum and other organic materials from areas that have been neglected or subjected to heavy use. It also removes synthetic and acrylic waxes and floor finishes.

EasyMat® Tile & Stone Underlayment


Sizes: 3mm, 5 mm and 12 mm
A versatile mat underlayment for setting tile and stone over any acceptable subfloor. EasyMat® is so fast and easy to install because it is up to 25 times lighter than 1/4" (6 mm) backerboard, cuts easily with a utility knife, doesn't require any nails or screws, and comes in a peel & stick version. The mat was specially designed so that the mortar locks in, creating a bonded crack-prevention system for subfloor movement up to 1/4" (6 mm). This bonded system will withstand repeated stress and still maintain its tenacious bond.





CUSTOM® 9240 WATERPROOFING & ANTI-FRACTURE MEMBRANE

A flexible, seamless waterproofing membrane with a liquid-applied polymer and reinforcing fabric that bonds to a variety of substrates and is ideal for heavy duty service installations. Designed for waterproofing tile and stone installations, Custom® 9240 also provides protection from fractures to 1/8" (3 mm) over shrinkage and other non-structural cracks.




WONDERBOARD® LITE BACKERBOARD

A 20% lighter fiberglass mesh-reinforced cement backerboard for residential and commercial tile, stone, slate and thin-brick applications. High-flexural strength, along with moisture resistance, makes WonderBoard® Lite ideal for both interior and exterior substrate applications. WonderBoard Lite meets the performance standards of ANSI A118.9.




LevelLite™ Self-Leveling Underlayment




Formulated with CustomLite® Technology, LevelLite® is 40% lighter than other self-leveling underlayments, making it easier to pour and carry.


LevelQuik® ES Extended Setting Self-Leveling Underlayment

Helps level floors prior to the installation of ceramic tile, natural stone, resilient flooring, carpet, wood and other floor coverings. This quick-setting underlayment can be applied to 1" (2.5 cm) thick in one pour and seeks its own level in minutes. With proper installation, the use of LevelQuik® ES can achieve an extra heavy rating for high impact use in food plants, dairies, breweries and kitchens.



FLOOR MUD PRE-BLENDED UNDERLAYMENT


Floor Mud produces an excellent underlayment for floor tile installations. FLOOR MUD is a factory blend of Portland cement, sand and chemical modifiers for floating shower pans and other floor areas. Meets ANSI A108.1, A108.4, A108.5 and A108.6.








MEGALITE® CRACK PREVENTION MORTAR

Ultimate performing lightweight mortar protects against cracks up to 1/8" (3 mm). Offers the ultimate in bond strength for the most demanding installation requirements with the flexibility to withstand horizontal substrate movement up to 1/8" (3 mm). Formulated with CustomLite® technology, it's 40% lighter than other mortars, providing excellent handling characteristics, and offers non-sag, non-slip installation on walls. Diverse in application, it is capable of thin-set or medium-bed use up to 3/4" (19 mm) thick on horizontal surfaces after beat in. Non-slump, medium-bed features provide the ultimate support for large format tile and stone.






MULTI-PURPOSE FLEX POLYMER-MODIFIED THIN-SET MORTAR

Multi-Purpose Flex has superior bond strength for setting porcelain, glass and other non-porous tile to concrete surfaces, backerboards and self-leveling underlayments. Sets large porcelain tile over 12" x 12" (30 x 30 cm). Also great for radiant heating system installations. Meets ANSI A118.4 and A118.11 without additives.








MULTI-BOND FLEX POLYMER-MODIFIED THIN-SET MORTAR

Multi-Bond Flex offers high flexibility and bond strength for a wide variety of floor and wall tile installations. It offers exceptional adhesion to plywood subfloors and is an excellent choice for porcelain and glass tile installations. Exceeds ANSI A118.4 and A118.11 without additives.








EBM-LITE™ EPOXY BONDING MORTAR - 100% SOLIDS

A three-component, water-washable 100% solids epoxy mortar system for installations where exceptional high-strength and chemical and impact resistance is required. 100% solids epoxy systems unique formula produces a mortar with greater bond and compressive strengths and improved chemical resistance over conventional cement or emulsion-based setting systems. EBM-Lite's™ unique and technologically advanced formulation provides non-sag and non-slip features that allows the mortar to hold its comb and hold tile in place.


FAST SET 5000 FAST CURING BONDING MORTAR



Fast-Set 5000 is a sanded thin-set specifically designed for time-critical installations. Grout in just 2 hours, traffic in 6. Polymer-modified for high bond strength. Excellent for commercial use by experienced installers or cold temperature installations. Meets ANSI A118.4. 






GTS® SANDED THIN-SET MORTAR

GTS is an economical sanded thin-set for floor tile. Meets ANSI A118.1 and ANSI A108.5.





MULTI FLOOR-SET MORTAR


A basic, economical polymer modified thin-set mortar that meets ANSI A118.4 requirements. It offers good bond strength for tile installations over most surfaces. Apply over concrete, cement backerboards, masonry and existing ceramic tile without the need for additives.


BOND ACCELERATOR 4000 LATEX ADDITIVE

Bond Accelerator 4000 is a latex admixture that accelerates the set of dry set mortars while providing a higher bond strength. Meets ANSI A118.4 and ANSI A118.6.


MASTIK 500 TYPE 1 CERAMIC TILE MASTIC


Mastik 500 is an excellent, acrylic mastic with added polymers designed for use in areas requiring prolonged water resistance. Meets ANSI A136.1.








FUSION PRO


A professional grade, single component grout with the stain resistance and color consistency of epoxy grouts, but with the workability of cement grouts. Fusion Pro is ready to use on all tiles including glass tiles and polished natural stone, for exterior and interior wall and floor use. Fusion Pro is a high performance, advanced patent pending formulation that features built-in Microban antimicrobial product protection to inhibit the growth of stain causing mold and mildew on dried grout.

PRISM® SURECOLOR® GROUT

A lightweight, polymer-modified, cement-based grout that offers consistent color without mottling or shading, regardless of tile type, temperature or humidity. With dense joints that provide more stain resistance than standard cement grouts, cures quickly and develops high early-strength to accommodate grout joints from 1/16" (1.6 mm) to 1/2" (13 mm). Prism® may be used for interior or exterior installations, including floors, countertops, walls, ceilings, showers, fountains





DRY GROUT


DRY GROUT is non-sanded and formulated for grouting porous floor and wall tiles with joints up to 1/8" (3 mm) wide. Ideal for use with glazed tile and polished marble that can be scratched by sanded grout. It can be used for interior and exterior applications. Meets ANSI A118.6 specifications.
CERAMIC TILE CAULK, SANDED AND NON-SANDED


A Siliconized, acrylic latex caulk that matches the most popular Master Color Grout Colors.



SEALER'S CHOICE GOLD®



A premium, no-sheen, natural look, water-based, penetrating sealer formulated to provide maximum stain protection, especially in food preparation and serving areas. May also be used as a pre-grouting sealer.


HIGH GLOSS SEALER



A specially formulated water-based sealer of acrylic polymers that provides both a stain-resistant surface seal and a durable high-sheen finish, eliminating the need for two products. May also be used as a pre-grouting sealer. Unaffected by ultra-violet light.




EFF-EX®


Removes and inhibits efflorescence. Eff-Ex® is a non-acidic (pH 7.4), heavy-duty cleaner.
FacebookTwitterInstagramLinkedInPayPalGoogle Plus